100m Long Optical Rangefinder Sensor Outdoor

100m Long Optical Rangefinder Sensor Outdoor
Hello.
Are you looking for a long optical rangefinder sensor? The BA6A20410N laser sensor can measure 150m with +-3mm high accuracy. Is it enough for your laser measuring project? 
If you need longer Laser Distance Sensor, like 700m or 1200m, welcome to contact us.

Best sale in UAE:
This 100m Long Range Distance Sensor sold well in United Arab Emirates, mainly using for industrail automations.If you want to give you some advice for your Laser Measurement Solutions, welcome to contact us. 

How is our customers use the distance to test?
Normally, our customers will order the usb cable distance module, as it can be used to test easily, via installing and inserting the USB into their computer. 

Techinical parameters

Measuring time: 0.4s-4s
Accuracy: ±3 mm
Measuring Unit: mm
Applications support connect to your Arduino/Raspberry Pi etc.
Measuring Range 0.03-100m
Laser Class Class II
Laser Type 620nm-690nm, <1mW
Size 64*40*18mm
Weight About 13g
Voltage DC2.0~3.3V
Electrical Level TTL/CMOS
Frequency 3 Hz
Operating Temperature 0-40 ℃ (32-104 ℉ )
Storage Temperature -25~60 ℃ (-13~140 ℉)

Notes:

1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.

2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. Voltage can be changed by power converter LDO
4. Frequency would be affected by environment.
5. Operating temperature -10 ℃~50 ℃ can be customized.
6. Analog can be customized.

Diagram for the 100m Laser Distance Sensor:

Detailed Pictures:

Application that may help for your laser distance projects

Using instruction may help you:

How to use your module to test?
There is a simple steps for you:
1. install the Gese software and USB driver on your computer.

2. Then you can send the related command to test

Communication
1.‘O’(0x4F): Turn ON laser beam, and return “,OK!”; 
2.'C'(0x43): Turn OFF laser beam, and return “, OK!”; 
3.'S'(0x53): Module status read, module returns Temperature & Battery Voltage, e.g.: “18.0’C, 2.7V”; 
4.'D'(0x44): Auto mode Distance read.

Hardware Connections 
1. Hardware Interface: 2 line USART(Rx, Tx); 
2. Baudrate: 19200bps; 
3. Data bits: 8b; 
4. Parity: none; 
5. Flow control: none.

Some test datas from our customers: customers said it's a Precision Distance Sensor.

Feedbacks: 

Customer for our long range distance sensor BA6A (the previous version of B87A):
Hi JRT,
I can confirm 100x BA6A laser modules have been received successfully, visually all looks good,
Thank you for your help and patience

Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor , Tof LiDAR Sensors.