3Hz RS232 Sensor Measurement Module 50m

3Hz RS232 Sensor Measurement Module 50m

laser sensor measurement module comes equipped with a CMOS protocol Range Sensor. When you test this optical Distance Sensor, the rs232 interface model to test and measure distance is your good choice, via inserting it to your computer.This long Laser Ranging Sensor support measuring the distance of 50m. With 3hz fast measuring,ustomers would like to use the laser measure distance module for outdoors.

Technical Parameters:
Range: 0.03-50m
Invisible measuring: 620nm-690nm
Measuring accuracy: +-1 mm
Measuring frequency: Up to 8Hz
Laser type: Class 2, red
Interface options: Serial/usb/rs232/rs485/bluetooth
Size: 45*25*12mm
Voltage: DC2.0~3.3V
Electrical Level: TTL/CMOS
Working temperature: 0 ~ 40 degree
Storage temperature: -25 ~ 60 degree

With RS232 port design, customers usually used to connect to arduino, Raspberry Pi, MCU,IPC etc.

Note:
1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.

2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. 60m can be customized.
4. Voltage can be changed by power converter LDO
5. Frequency would be affected by environment.
6. Operating temperature -10 ℃~50 ℃ can be customized.
7. Analog can be customized.
More Detailed Pictures

50m Sensor Measurement Module Working Principle

This smart sensor is a small range sensor with 45*25*12mm, which can be easily integrated to you device.

Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor , Tof LiDAR Sensors.