RXTX Connector Distance Transducer Frequency

The laser distance sensors for long measuring ranges is millimeter accuracy with small size 45x25x12mm.
You can measure and monitor the distances and positions from 30 millimeters to 40 meters accurate to a few millimeters, and at sample rates in the micro seconds.With accurate Distance Sensor from JRT, y customers use for their industrial project, without contacting the measured surface.

Hardware Connections 

1. Hardware Interface: 2 line USART(Rx, Tx); 
2. Baudrate: 19200bps; 
3. Data bits: 8b; 
4. Parity: none; 
5. Flow control: none.

Detailed Pictures

Distance Transducer Frequency Front

Distance Transducer Frequency Back

Diagram for the Laser Distance Transducer Frequency

Range: 0.03-40 meters
Invisible measuring: 620-690nm
Measuring accuracy: +-1 mm
Measuring frequency: Up to 3 Hz/ 8hz
Laser type: Class 2, red
Interface options: Serial/usb/rs232/rs485/bluetooth

Size: 45*25*12mm
Working temperature: 0 ~ 40 degree
Storage temperature: -25 ~ 60 degree
Notes:
1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.
2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. 60m can be customized.
4. Voltage can be changed by power converter LDO
5. Frequency would be affected by environment.
6. Operating temperature -10 ℃~50 ℃ can be customized.
7. Analog can be customized.

The laser and lens for the Laser Distance Transducer 

Feedbacks: 

Chengdu JRT Main Ranging Modules: laser distance meter module, industrial laser distance sensor, mini Tof LiDAR Sensor.