100m USB Red Laser Long Distance Measurement Sensors

100m USB Red Laser Long Distance Measurement Sensors

JRT always insists on making more competitive laser distance modules for our custoemrs. This is our new version 100m Laser Measurement Sensors, it can be used in outdoors and indoors. We are very welcomed you share more of advices.Do you want to be our disturbutor in Turkey? Can you get in touch with us for more information and plan? 
FQA from our customers:
1. Question: I am interested on buying a 100m Long Distance Measurement Sensors or other measurement device to be used with raspberry or arduino. Could you give an estimated price please. 
   Answer:   Yes, please tell us your detailed shipping address to check.
2. Question: I am interested on apply it on outdoor distance measurement projects. Does it support continuous measurement mode?
   Answer:   Yes, our Laser Range Sensor can measure in continuous measuring mode.
Best sale in Europe and America:
This 100m Range Distance Sensor sold well in Europe, as all of our laser distanc sensor has FDA etc. certificates, global customers can import and use for industrial automations solutions.If you want to get some advices for your Laser Measurement Solutions, welcome to contact us.  

Features
Max length from 30 mm...100 m
Fast response time 0.4s-4s for high-speed 
Interface option: serial/rxtx, usb output

How is our customers use the distance to test?
Normally, our customers will order the usb interface distance module, as it can be used to test easily, via installing and inserting the USB into their computer. 

Techinical parameters

Measuring time: 0.4s-4s
Accuracy: ±3 mm
Measuring Unit: mm
Applications support connect to your Arduino/Raspberry Pi/MCU etc.
Measuring Range 0.03-100m
Laser Class Class II
Laser Type 620nm-690nm, <1mW
Size 64*40*18mm
Weight About 13g
Voltage DC2.0~3.3V
Electrical Level TTL/CMOS
Frequency 3 Hz
Operating Temperature 0-40 ℃ (32-104 ℉ )
Storage Temperature -25~60 ℃ (-13~140 ℉)

Notes:

1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.

2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. Voltage can be changed by power converter LDO
4. Frequency would be affected by environment.
5. Operating temperature -10 ℃~50 ℃ can be customized.
6. Analog can be customized.

Diagram for the 100m Laser Distance Sensor:

Detailed Pictures:

How to package your laser distanc sensor?

How to use your module to test?
There is a simple steps for you:
1. install the Gese software and USB driver on your computer.

2. Then you can send the related command to test

Communication
1.‘O’(0x4F): Turn ON laser beam, and return “,OK!”; 
2.'C'(0x43): Turn OFF laser beam, and return “, OK!”; 
3.'S'(0x53): Module status read, module returns Temperature & Battery Voltage, e.g.: “18.0’C, 2.7V”; 
4.'D'(0x44): Auto mode Distance read.

Hardware Connections 
1. Hardware Interface: 2 line USART(Rx, Tx); 
2. Baudrate: 19200bps; 
3. Data bits: 8b; 
4. Parity: none; 
5. Flow control: none.

Some test datas from our customers: customers said it's a Precision Distance Sensor.

Feedbacks: Customer to Joyce Liu for our Long Range Distance Sensor B605B (the previous version of B87A):

About Us

Chengdu JRT Main Ranging Modules: laser distance meter module, industrial laser distance sensor, mini TOF ranging sensor.