8 Pcs Laser Measuring Sensors For Multi-slaves Network

8 Pcs Laser Measuring Sensors For Multi-slaves Network_JRT Measure

Hello dear all customers,

U81 series Laser Rangefinder Module was developed for fast and precise distance measuring, even in harsh measurement conditions, like with poor reflect laser signal level. U81 accuracy and precision lidar sensor extremely small (41*17*7mm)and lightweight(about 4g) make it suitable for size and weight limited applications, such as portable devices, drones, medical devices, granary application, warehouse logistics trolley etc.

Are you looking for a Laser Range Finding Module via Hex command, support with multi-slaves network? Yes, JRT Distance Sensor multi-slaves network wiring.

If you are a engineer who need develop an application for artisans. And the application will need to be connected with 8 pcs laser distance sensors to control. The data should be displayed on a computer, with the following specifications: the rangefinder should measure short distance of 20m, and allow measurements to be taken to within +-1~3 millimeter. Ideally, it should also be able to measure from a zero point. These are basic requirements of our Laser Distance Module:
The U81 serial will work.
The measure distance is 10m/20m, the accuracy is ±1mm~±3mm,the frequency is 3HZ.
And also can measure in a slow moving object.
Multi-slaves Network LiDAR sensor

The laser sensor wires details you select :
Each module should be welded with corresponding wires (generally need 5, VCC/GND/TX/RX/PWREN);
Module VCC links USB-VCC/
The module GND connects to USB-GND/
Module RX is linked to USB-TX/
Module TX is connected to USB-RX
The module POWEREN is connected to USB-DTR
(Make sure that the +3/3.3V power supply of the module is normal)

Any other questions, please let us know.
Regards

Chengdu JRT Main laser measuring Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor, Tof LiDAR Sensors.