100m Cheap LiDAR Price 5v Laser Distance Sensor

100m Cheap LiDAR Price 0 5v Laser Distance Sensor
The laser Distance Sensor is a low power consumption lidar sensor. The cheap lidar module can measure up to 100 metres with high accuracy, according to the advanced equipment for high production.
Customers usually asked:
1. Can you tell me the external interface? Serial/rxtx, usb, rs232 output options
2. Can you tell me the price including the interface option? Yes, please tell us which interface you required.
Best sale in the United States:
This 100m Long Range Distance Sensor sold well in Korea, mainly using for industrail automations.If you want to give you some advice for your Laser Measurement Solutions, welcome to contact us. 
Features
Max length from 30 mm...100 meters
Fast response time 0.125s-4s for high-speed 

How is our customers use the distance to test?
Normally, our customers will order the usb cable distance module, as it can be used to test easily, via installing and inserting the USB into their computer. 

Techinical parameters

Measuring time: 0.125s-4s
Accuracy: ±3 mm
Measuring Unit: mm
Applications support connect to your Arduino/Raspberry Pi etc.
Measuring Range 0.03-100 m
Laser Class Class II
Laser Type 620nm-690nm, <1mW
Size 64*40*18mm
Weight About 13g
Voltage DC2.0~3.3V
Electrical Level TTL/CMOS
Frequency 3 Hz
Operating Temperature 0-40 ℃ (32-104 ℉ )
Storage Temperature -25~60 ℃ (-13~140 ℉)

Notes:

1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.

2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. Voltage can be changed by power converter LDO
4. Frequency would be affected by environment.
5. Operating temperature -10 ℃~50 ℃ can be customized.
6. Analog can be customized.

Diagram for the 0 5v Laser Distance Sensor:

Detailed Pictures:

How to use your module to test?
There is a simple steps for you:
1. install the Gese software and USB driver on your computer.

2. Then you can send the related command to test

Communication
1.‘O’(0x4F): Turn ON laser beam, and return “,OK!”; 
2.'C'(0x43): Turn OFF laser beam, and return “, OK!”; 
3.'S'(0x53): Module status read, module returns Temperature & Battery Voltage, e.g.: “18.0’C, 2.7V”; 
4.'D'(0x44): Auto mode Distance read.

Hardware Connections 
1. Hardware Interface: 2 line USART(Rx, Tx); 
2. Baudrate: 19200bps; 
3. Data bits: 8b; 
4. Parity: none; 
5. Flow control: none.

Feedbacks - the Customer to Joyce Liu:
Hi Joyce,
I received the modules.  They work great!  I was wondering if you were able to change the orientation of the lens relative to the circuit board, so that they are perpendicular, rather than parallel.  If you need a drawing let me know, and I'll make one.
Thanks!

Chengdu JRT Main Ranging Modules: laser distance meter module, industrial laser distance sensor, mini TOF ranging sensor.