How To Use A Laser Telescope Rangefinder Module

In the previous article, we learned the basic knowledge of golf rangefinder sensor. But many people may not know how to use them. Now I will introduce you how to use a golf rangefinder module.

First, the preparation
Connect the module to the power supply according to the battery installation instructions.

Second, start to measure
Press the measure button and the module will be turned on and the LCD will display the measurement mode(the default mode is straight distance measurement), then aimming at you target, and press the measure button again, the rangefinder sensor will make a vibration to respond and the result will be showing on the LCD.
Long press the measure button, the modle will make continous measurements and display the measurement results in real time.

Third, complete your measurement
The Laser Rangefinder Sensor will automatically shut down after 15 seconds of no operation.
Note: 1. The rangefinder will display [---"when the target is over the measure range or failed to measure.
2.The rangefinder will display [0.0" when the measuring distance is less than minimum measuring range.

The application of laser range finder

Laser Rangefinder has been widely used in the following fields: Electricity, Water conservancy, communications, environment, construction, geology, police, fire, blasting, sailing, railway, counter-terrorism/military, agriculture, forestry, real estate, leisure/field sports and so on.

Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor , Tof LiDAR Sensors.