Let`s introduce the precautions for the first test phase type product:
1. Please wear the provided anti-static gloves or take other anti-static measures after receiving the goods.
2. Please pay attention to whether the package of the laser module is complete, and whether there is obvious damage to the components after taking out the module (products without shell).
3. Please connect the pins according to the instructions.
4. If the Laser Measuring Sensor does not have a casing, please pay attention to ensure that the power supply is DC2.5-3.3V, 3V is better.
5. Please pay attention to whether there is current after wiring. If there is current, it means that the module is working normally.
6. If using the serial assistant to test samples, please check again Hex, serial port, wiring, voltage, baud rate before starting the measurement command.
7. Send a command during the test, and the data returns AA to indicate a correct response, and FF to indicate an invalid value or an error.
8. After the High Accuracy Distance Sensor works normally, please measure according to the corresponding command
9. If there is a measurement error, please contact the sales staff, we will find a solution for you as soon as possible.
This is the test precautions for phase products, if you have any questions, please contact us in time.
Chengdu JRT Main Laser Measuring Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor, Tof LiDAR Sensors.
Chengdu JRT Meter Technology Co., Ltd
