150m Long Range Laser Sensor Arduino

150m Long Range Laser Sensor Arduino
This laser sensor you see is one of our best sales long range laser sensors. BA6A02-150m has a long range measuring capabilities of 150m. It 's widely used in connecting with arduino, if you want simply plugs-in to your computer, we also provide the usb adapters communication Distance Sensor option. According to its compact and light-weight design, long range and low power consumption, customer usually used in the industrail application fields. 

Why JRT laser sensor?
- UNIQUE SMALL MODULE DESIGN
- NON CONTACT MEASUREMENT
- 150M LONG RANGE
- SUPPORT CONNECTING WITH ARDUINO

Best sale in Korea:
This 150m Long Range Distance Sensor sold well in Korea, mainly using for industrail automations.If you want to give you some advice for your Laser Measurement Solutions, welcome to contact us. 
Features
Max length from 30 mm...150000 mm
Fast response time 0.4s-4s for high-speed 
Interface option: serial/rxtx, usb output

How is our customers use the distance to test?
Normally, our customers will order the usb cable distance module, as it can be used to test easily, via installing and inserting the USB into their computer. 

Techinical parameters

Measuring time: 0.4s-4s
Accuracy: ±3 mm
Measuring Unit: mm
Applications support connect to your Arduino/Raspberry Pi etc.
Measuring Range: 0.03-150m
Laser Class: Class II
Laser Type: 620nm-690nm, <1mW
Size: 64*40*18mm
Weight: About 13g
Voltage DC2.0~3.3V
Electrical Level: TTL/CMOS
Frequency: 3Hz
Operating Temperature: 0-40 ℃ (32-104 ℉ )
Storage Temperature: -25~60 ℃ (-13~140 ℉)

Notes:

1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.

2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. Voltage can be changed by power converter LDO
4. Frequency would be affected by environment.
5. Operating temperature -10 ℃~50 ℃ can be customized.
6. Analog can be customized.

Lens for the 150m Laser Distance Sensor:

Detailed Pictures:

How to package your laser distanc sensor?

How to use your module to test?
There is a simple steps for you:
1. install the Gese software and USB driver on your computer.

2. Then you can send the related command to test

Communication
1.‘O’(0x4F): Turn ON laser beam, and return “,OK!”; 
2.'C'(0x43): Turn OFF laser beam, and return “, OK!”; 
3.'S'(0x53): Module status read, module returns Temperature & Battery Voltage, e.g.: “18.0’C, 2.7V”; 
4.'D'(0x44): Auto mode Distance read.

Hardware Connections 
1. Hardware Interface: 2 line USART(Rx, Tx); 
2. Baudrate: 19200bps; 
3. Data bits: 8b; 
4. Parity: none; 
5. Flow control: none.

Some test datas from our customers: customers said it's a Precision Distance Sensor.

Feedbacks: Customer to Joyce Liu for our long range distance sensor B605B (the previous version of B87A):
Hi,
I can confirm 40x BA6A laser range modules have been received successfully, visually all looks good,
Thank you for your help and patience

Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor , Tof LiDAR Sensors.