150m Laser Measure Sensors RS485

150m Laser Measure Sensor RS485

The BA6A series is a class 2 laser measure Range Sensor with phase measurement technology. The BA6A05-150m measure sensor with a 0.3 - 150 m distance, already widely used in Industrial automation, Internet of things system,Water level monitoring etc. These Long Range Sensor series models with RS485 digital outputs, are available together with USB and RS485 serial interface.

Key parameters: Small, fast, precise 

Four interfaces optional: ttl, usb, rs232, bluetooth
Accuracy: +-3mm
Measuring time: 0.4s-4s
Size:64*40*18mm

Technical Specifications:

Range: 0.03-150m
Invisible measuring: 620nm-690nm
Measuring accuracy: +-3 mm
Measuring frequency: 3Hz ( 20Hz can be customized)
Laser type: Class 2, red
Interface options: Serial/usb/rs232/rs485/bluetooth
Size: 64*40*18mm
Voltage: DC2.0~3.3V
Electrical Level: TTL/CMOS
Working temperature: 0 ~ 40 degree
Storage temperature: -25 ~ 60 degree

Notes:

1. Under bad measure condition, like environment with strong light or the diffuse reflectance of measuring point over-high or low, the accuracy would have bigger amount of error: ±1 mm+40PPM.

2. Under strong light or bad diffuse reflectance of target, please use a reflector.
3. Voltage can be changed by power converter LDO
4. Frequency would be affected by environment.
5. Operating temperature -10 ℃~50 ℃ can be customized.
6. Analog can be customized.

More Detailed Pictures:

How to use your module to test?
There is a simple steps for you:
1. install the Gese software and USB driver on your computer.
2. Then you can send the related command to test
How to pack your samples of lidar sensor

Chengdu JRT Main Ranging Modules: Industrial Laser Distance Sensors, Laser Rangefinder Sensor , Tof LiDAR Sensors.